Bringing Concepts to Life

From looking at the above three cars you’re probably wondering what they all have in common and what they have to do with the BatBerry.  The answer is simple; they all provide lighting for the BatBerry! With lots of help from the guys on CLTC, I have been able to track down some good deals…

By

—

“Lights”… Camera… Action!

From looking at the above three cars you’re probably wondering what they all have in common and what they have to do with the BatBerry.  The answer is simple; they all provide lighting for the BatBerry!

With lots of help from the guys on CLTC, I have been able to track down some good deals on ebay for the Batmobile’s tail lights and headlights.

Tail Lights
The Batmobile’s tail lights come from a combination of two different cars.  The top set of lights are from a Ferrari 308.  The bottom set are from a Ferrari Dino 365.  Tracking down some decent deals on these lights was a challenge, but I was able to strike a deal with a couple of vendors on ebay will bring these lights to my door step at a fraction of their typical cost.

The Ferrari tail lights were the actual lights used for the Batmobile in the movies.  Below you can see a side-by-side of the lights on the Batmobile and the Ferrari lights.

Headlights
Headlights for the Batmobile are a bit of a different story.  Some say that they were 89 civic headlights, others say different.  What I do know is that after talking to guys at Gotham Cruisers, they have said that the 1988-92 Mazda 626 headlights worked like a charm for their kit.  Thanks to ebay, I was able to grab a set of these headlights at a much cheaper price than the Ferrari tail lights…. Real shocker eh? 🙂

The next challenge when it comes to lighting, will be to fabricate all the mounting points for the lights on the body.  But I guess first things first… I need to pick up the body 🙂

9 responses to ““Lights”… Camera… Action!”

  1. […] updated the BatBery Blog with some more details on the Batmobile's lighting “Lights”… Camera… Action! | Building the BatBerry __________________ Tim 02 2.5L 6spd W-I-D-E WRX 1989 Batmobile […]

  2. Aidan Avatar
    Aidan

    Tim, email me your number…i wanna see the body when it comes in! Ill help build 🙂 Batman rules!

    1. brcewane Avatar

      Hi Aidan,

      I’ll be picking up the body near the end of January or beginning of February. But I’ll be putting it someplace where it can sit until I have the chassis prepped. So it won’t make it to my garage until it has been mounted on the chassis.

  3. Back from Bali and the Mailman has been here! | Building the BatBerry Avatar

    […] now have my headlights and tail lights, the throttle quadrant and my coveroo BlackBerry Torch battery cover.  There were also a couple […]

  4. Tail Lights Mounted | Building the BatBerry Avatar

    […] figured I would spend the afternoon and get the tail lights mounted on the car.  This will definitely help make the car look more complete for […]

  5. Getting Started on the Nose | Building The BatBerry Avatar

    […] course as soon as I had them cut out I thought I would see how my headlights fit in the opening.  Of course they came no where close to being the right size.  In fact they […]

  6. New Headlights | Building The BatBerry Avatar

    […] my initial headlights from a 1988-92 Mazda 626 did not work out very well, I went on a search for ones that would fit. […]

  7. Nick Avatar

    this site is very impressive!
    where did you get the original batmobile kit? Im looking to start the project to have an Australian (RHD) version)

    1. Tim Neil Avatar

      The body is from Doug Hines

Leave a reply to Aidan Cancel reply